LDAP Authentication method provides a feature-rich authentication method suitable for use with LDAP Directories, including Active Directory.

Key Features:

  • Configuration setting to allow user creation on first successful login
  • Optional synchronization of Users, Groups and Group Memberships
  • Manual or Automatic synchronization of Users and Groups
  • Authentication only setting
  • Support for SSL and StartTLS

Enterprise Tester supports LDAP authentication and user synchronization.

Note that this functionality is for adding users only and ET does not currently support inactivating users or user deletion.

Enterprise Tester supports importing the following attributes into ET from LDAP:

1. First Name
2. Last Name
3. Email Address
4. Username
5. Phone Number.

The LDAP Configuration has 2 components:

  1. General configuration to your LDAP server; and
  2. Synchronization set up.

General LDAP Setup

Basic Configuration

FieldDescriptionExample
LDAP ServerEnter LDAP Serve Name or IP Address123.123.1.234
PortPort number associated with the LDAP Server389
Protocol VersionVersion of LDAPVersion 2 (required for some older OpenLDAP installations) or Version 3 (Active Directory and new LDAP Directory implementations)
Authentication TypeAuthentication ProtocolAnonymous, Basic, Negotiate, NTLM, Digest, Sicily, Dpa, Msn, External or Kerberos
SSLEncryption ProtocolCheck if using SSL
StartTLSEncryption ProtocolCheck if using StartTLS
Base DNName of the root node in LDAP from which to search for userscn=users,dc=example,dc=com
Additional User DNPrepended to the Base DN to limit the scope when searching for users 
Additional Group DNPrepended to the Base DN to limit the scope when searching for groups 
Bind DNBind DN is the user and the node in LDAP where the user can be found (this is the user Enterprise Tester will authenticate to the LDAP directory as - they must have sufficient rights to query the LDAP directory)Either a value distinguished name such as "cn=user,cn=Users, dc=example,dc=com", an username@domain e.g. "joebloggs@mycompany.local" or left blank for anonymous authentication.
Bind PasswordPassword for the Bind DN userPassword, or left blank for anonymous authentication.
Search AttributeThe attribute in LDAP holding the login nameuid (common for OpenLDAP) or sAMAccountName (Active Directory)

Paging

FieldDescriptionExample
Enable PagingWhen enabled, users will be returned in multiple pages rather than a single list. This is useful when you have a large number of users configured in LDAP, and where a non-paged request will fail because the query returns more than the allowable maximum - this should always be enabled for Active Directory.True
User Page SizeSpecify the number of users to return per page. The default value is 100. This value should ideally be configured to be the same as the maximum number of results which can be returned from a single query to ensure the least number of round trips when querying LDAP.1000
Group Page SizeSpecify the number of groups to return per page. The default value is 100. This value should ideally be configured to be the same as the maximum number of results which can be returned from a single query to ensure the least number of round trips when querying LDAP.500

User Configuration

FieldDescriptionExample
Object FilterFilter user for retrieving all users(&(objectCategory=Person)(sAMAccountName=*))
Search Filter TemplateFilter used for searching by name or partial name.(&(objectCategory=Person)(sAMAccountName={0}))
User Name AttributeUser Name Attributeuid (common for OpenLDAP) or sAMAccountName (Active Directory)
First Name AttributeFirst Name AttributegivenName
Last Name AttributeLast Name Attributesn
Email Attributemail
Telephone AttributePhone AttributetelephoneNumber

Group Configuration

FieldDescriptionExample
Object FilterGroup Object Filter(&(objectCategory=Group)
Search Filter TemplateGroup Search Filter Template(&(objectCategory=Group)(cn={0}))
Name AttributeGroup Name Attributecn
Description AttributeGroup Description Attributedescription

Group Member Configuration

FieldDescriptionExample
Group Member AttributeMembers attribute of groupmember
Group Members FilterMembers Attribute Filter(objectClass=user)

Once you have completed your configuration, select 'Save' at the bottom of the page.

Synchronization

The synchronization section allows you to set up the synchronization mode, the frequency of synchronization and any default groups you wish to have new users added to when being synchronized with Enterprise Tester.

FieldDescriptionExample
ModeSelect the type of integration you would like with LDAP
  1. Authentication only – LDAP is used to authenticate users only
  2. Synchronization – Users, Groups and Group Memberships are automatically created in Enterprise Tester
  3. Create User on Successful Authentication – New users are automatically created on first login if they are successfully authenticated in LDAP
ScheduleSynchronization FrequencyManual Synchronization, Every Hour, Every 2 Hours, Every 4 hours, Every 8 Hours and Every 24 Hours.
Synchronize UsersSelect to synchronize Users from LDAPCheck to synchronize users
Synchronize GroupsSelect to synchronize Groups from LDAPCheck to synchronize Groups
Synchronize Group MembersSelect to synchronize Groups from LDAPCheck to synchronize Group Members for each user

Default Groups

In the Default Group section you can configure all the groups you would like users to automatically be assigned to when they are created through synchronization with LDAP or through successful authentication on first login, this is in addition to any group memberships that user may have been automatically added if "Synchronize Group Members" is checked.

Unless you specify at least one default group (and assign that group view permissions for at least 1 project) any users created as a result of using the "Create User on Successful Authentication" option will be unable to use Enterprise Tester.

Additional References

  • No labels